Here's a quick tip, that also applies to any linux machine using dhcpd.

Every now and then my Raspberry Pi or my router can reboot, and I'm not certain than my Pi will get the same IP address from the DHCP server.

Sure, I could fix it on the DHCP server using the Pi's MAC address, but if you're a lazy bum like me you can tell dhcpd to request a specific IPv4 address.

Add theses lines in /etc/dhcpd.conf:

interface eth0
static ip_address=192.168.1.42/24
static routers=192.168.1.1

You NIC is probably going to be eth0, but make sure to set the 2 last lines to the correct parameters (client address, netmask and gateway).
You can get your current IP configuration by running the ifconfig or ip a commands.

Once it's done, restart the dhcpd service or reboot.